Newheek manufacture high quality X Ray Grids.Welcome to purchase.
Email

HomeBlog ›Super X-ray grid effect

Super X-ray grid effect

The Super X-ray grid sits between the human body and the film and filters out most of the scattered lines. Only a small fraction of the scattered lines leak through.

The exposure coefficient of Super X-ray grid is generally one of the standards to measure an X-ray grid. The exposure coefficient B is the ratio of the exposure required to obtain the same density value when the filter grid is not used and after the use of Super X-ray grid.

B value is generally between 2 and 6. The smaller the B value of the filter grid with the same performance, the better. In addition, when X-ray photography is carried out, the filter grid will be used when the limb thickness is more than 15cm.

Super x ray grid board appearance for a 4~8mm thick plate.The internal structure is formed by intersecting many thin lead bars.The two lead strips are positioned and cemented together with a substance that penetrates x-rays. Fillers can be wood, paper or aluminum sheets. Finally up and down with thin aluminum packaging, forming a Super ray grid version.

From the view of the section, the direction of arrangement of the filter plate lead will converge to a point. From the whole grid board, there is a convergence line.

Newheek Super x ray grid can meet your different purchasing needs.If you are interested in the X-ray Grid produced by Newheek, please send us an email to discuss the details.

Author:肖恩


(+86) 18953613955
service@newheek.com