Newheek manufacture high quality X Ray Grids.Welcome to purchase.

HomeBlog ›X-ray grid for side bucky stand

X-ray grid for side bucky stand

The filter grating is used for the side mounted bucky stand. The filter grating can enter and exit from both sides of the side mounted bucky stand.

The side mounted bucky stand is a frame pulled out and put into the film box from both sides. The filter grating is put into the film box. The wired flat panel detector can be put into the side-mounted frame. The size of the wired flat panel can be 14 “X17” or 17 “X17”. The maximum inside of the side-mounted frame can be 2.4cm flat panel detector. The side mounted bucky stand can also be divided into two types: manual and electric.

The lifting mode of the cartridge of the manual camera holder is to move manually and fix the cartridge by rotating the screw. The electric camera rack is based on the manual camera rack with an electric device, which can directly use the remote control or the electric button to adjust the position of the film box. The electric side mounted bucky stand and the manual side mounted bucky stand are placed into the filter grating from both sides.

If you are interested in our X-ray Grid, flat panel detector or Bucky Stand, please feel free to contact us


(+86) 18653679166