Xray grid for industrial detection Xray machines
Recently *Inquiry Xray grid of the research institute, the size is 14*17 or 17*17, the grid ratio is 10:1, and the focal length is about 50CM, the smaller the better. The Korean Xray flat panel detector is used for supporting industrial x It is used for optical-mechanical flaw detection equipment, and this Xray grid needs to be customized, and then as long as the grid ratio is 12:1, the grid density of the Xray grid is 150 countries/in, and the shorter the focal length, the better. Is our Xray grid a grid-like lead bar? Tell us that we normally use a convergence grid. If a parallel grid is used, there is no focus. If the customer wants a grid-like lead bar, it is a cross grid. Xray grids are more expensive. If you determine that you need this kind of Xray grids, you need to customize them now. Customers say they will negotiate again.
Dear users, if you purchase an Xray grid next time, I believe you should know all the parameters of the Xray grid. If you have any questions, Send an email to: service@newheek.com
Author:肖恩