Dealer consultation on X-ray grid

Distributor inquired about X-ray grid. The customer saw our company’s X-ray grid on the website and called our customer service to consult. What specifications of X-ray grid does the customer need? The customer requested PT-AS-1000 with dimensions of 18 * 18. Ask the customer for specific grid density, grid ratio, and focal length? The customer replied with 18×18 inches, 10:1, F1.8m, 40L/cm. Based on the customer’s requirements, a quotation will be provided to the customer.

The customer claims to be using a 14×17 inch flat panel detector and asks if we have a 15×18 X-ray grid? Reply to the customer, but the price for 15×18 and 18×18 in our company is the same.

Welcome to contact us.
Email ：service@newheek.com
Tel:+86 18953679166 ; Whatsapp:+86 18953679166

Let me briefly explain the principle of X-ray grid (the following information comes from the internet). X-ray grid is a photographic term used to filter out the effects of scattered rays on film. Used to filter out the influence of scattered rays on film. When in use, it should be placed between the human body and the film, which can filter out most of the scattered lines and only a small part of the scattered lines will leak through. The appearance of the X-ray grid is a flat plate with a thickness of 4-8mm. The internal structure is composed of many thin lead strips intersecting and arranged. Fill and position the two lead bars with a substance that is easily transparent to X-rays, and bond them together. The filling material can be wood, paper, or aluminum sheet, etc. Finally, the top and bottom are encapsulated with thin aluminum plates to form an X-ray grid. From the cross-section, the arrangement direction of the lead bars on the X-ray grid plate converges to one point. From the perspective of the entire grating, there is a converging line.

Author：X Ray Grids Maker