X-ray grid

The X-ray grid filters the messy scattered rays. Where is the X-ray grid installed? Since the X-ray grid the scattered rays, it must be installed on the X-ray auxiliary equipment. Such as under the flat bed of X-ray machine, above the film rack, etc.
The grid is classified according to the structure:

1 Convergence grid: each lead bar is inclined to the focus, that is, the extension line of the lead bar is concentrated on the focus;
2 Parallel grid: each lead bar is parallel to each other in the vertical plane;
3 Cross grid: It is composed of two layers of parallel grids, and the lead strip directions are 90° with each other;
4 Circular arc grid: It is formed by superimposing the same radius from the center outwards, and it is tile-shaped;

The grid is classified according to the material:

1Commonly used grid: the internal spacer is a non-metallic material title, and non-metallic low-density materials such as wood chips, paper chips, plastics, etc.
2 All metal grid: internal spacer is made of metal material: aluminum sheet, high strength, good moisture resistance

We in Newheek produce and sell various X-ray machines and parts. Products are widely used in domestic and foreign medical and health fields. If you are interested in our products, please contact us.

Author：Lillian