The density of the X-ray grid is 40L and 103L, which is good

X-ray grid is used to filter out the influence of scattered rays on the film. Used to filter out the influence of scattered rays on the film. Should be placed between the human body and the film, most of the scattered rays can be filtered out, and only a small part of the scattered rays can be leaked.
The appearance of the X-ray grid is a flat plate with a thickness of 4-8mm. The internal structure is formed by intersecting many thin lead strips. The two lead strips are filled and positioned with a material that is easy to penetrate X-ray, and glued together. The filler can be wood, paper or aluminum sheet. Finally, the top and bottom are encapsulated with thin aluminum plates to form a grid plate. Seen from the cross section, the arrangement direction of the lead strips of the filter plate will gather to one point. Seen from the entire grid, there is a line of convergence.
The grid density of the X-ray grid specifically refers to the number of lead bars within a unit distance. Our company’s X-ray grid is divided into ordinary grids and high-density grids. The effect of the high-density grid is better than that of the ordinary grid, but the price is also more expensive. If you are interested in our X-ray grid, please feel free to consult.

Author：Lillian